One machine for all processes.

Expand your MEYER machine with suitable peripheral devices and adapt your machine perfectly to your individual production.

Add to your production line

From conveyors and feeding systems to cooling systems and automation solutions – make your production line more efficient and flexible. Our comprehensive range of peripherals is designed to optimize your production processes and maximize the performance of your main machines.

Individual peripheral equipment for your machines.

Configure your machine individually according to your production requirements. We will advise you.

  • All extensions
  • Fusing
  • Laminating
  • Presses
  • Scattering
LaminatingScattering

Powder scattering machine

Thermoplastic adhesive is best treated in powder form. The use of adhesive powder is cheaper than hotmelt, films or webs and also offers the option of reacting quickly to changes in width or grammage.
LaminatingPressesScattering

Infrared heating fields

This allows the inlet material lane to be preheated or the powder adhesive to be pre-melted. The infrared heating fields can be equipped with individually configured heating zones in the run direction or across the run direction.
LaminatingPressesScattering

Cutting equipment

Cutting devices are used to make the laminated goods as precise as possible. MEYER offers a wide range of longitudinal, center or cross cutting devices that can be adapted to your needs.
LaminatingScattering

Material storage

To buffer roll changes or shorter downtimes, accumulators in various designs such as roller conveyors or Z-boxes are used. MEYER offers various types of storage when planning the lines.
Fusing

Leading belts

To increase efficiency and productivity and to reduce the workload of the operating personnel, our modern laminating machines can be supplemented with leading belts. The great advantage of leading belts is that the laminated parts can be prepared on the stationary leading belt.
LaminatingPressesScattering

Roll-off device

With the "roll to roll" process, the spectrum ranges from mechanically or pneumatically braked roll-off devices to winders with magnetic particle brakes and motorized roll-off devices.
LaminatingPressesScattering

Winder

The innovative winders from MEYER are all built in accordance with the EU standard DIN EN 13418:2013 (circumferential force > 150N) and therefore comply with the latest safety standards. The positioning on rollers or rails makes rewinding even more flexible.
LaminatingPressesScattering

Automation

MEYER relies on industrial robots and pick-and-place systems with suction cups, clamping or needle grippers for moving, depositing and stacking large panels. Even smaller parts can be handled flexibly and easily programmed by cobots.
Fusing

Stacker for fusing machines

Stacker systems serve to relieve the strain on operating personnel. They systematically place the fusible parts in lanes and stack them fully automatically after the fusing process. Fusing parts can be up to 1,650 mm long. For very wide parts, up to five lanes can be linked.
LaminatingPressesScattering

Conveyor belts

MEYER offers conveyor belts from 400 mm to 3000 mm width made of plastic, PTFE glass fabric, grid or textile. They can be combined with automation technology, sensors, detectors and air systems.
Fusing

Return belts

Return belts are integrated into our Fusing machines to transport the fused parts back to the operator. This allows the operator to place the fusing parts and then pick up the fused parts again.
Fusing

Light table

The fusing parts can be inspected on the backlit loading table plate at the inlet of the Fusing machine before they are fused. Foreign objects such as threads and dirt can be easily detected. The light table thus serves to ensure quality assurance during fusing.
LaminatingPressesScattering

Stacker

Stacker systems serve to relieve the strain on operating personnel. They systematically place the parts and stack them fully automatically after the laminating process.
Fusing

Winder for fusing machines

Good access, easy operation: MEYER's innovative winders limit the circumferential force < 150N and comply with the latest safety standards. Positioning on rollers or rails makes rewinding even more flexible.
Fusing

Roll-off device for fusing machines

With the "roll to roll" process, the spectrum ranges from mechanically or pneumatically braked roll-off devices to winders with magnetic particle brakes and motorized roll-off devices.

Experience MEYER machines on site.

Come and visit our Test Center and discover numerous possibilities for material tests and feasibility studies.