DKA

Machine | DKA

Our special machine for consolidating fiber composites combines several heating presses that enable high pressures for heating-up, consolidation and cooling. Temperatures of up to 400°C are possible. The presses can be electrically heated or oil-tempered. The machine is also equipped with transport systems and automation of the panels.

Advantages

The special design of the DKA machine offers various advantages for your production.

• Extreme pressures

• High temperature up to 400°C

• Cycle mode

Meyer machine: DKA

Advantages:

• Extreme pressures

• High temperature up to 400°C

• Cycle mode

Select suitable peripheral equipment.

With a selection of peripheral equipment, we adapt your new machine precisely to your requirements.

MEYER machine: DKA

Special features

MEYER sheeter presses are characterized by their intermittent process. The system transports the materials step by step through the heating and cooling presses, with pressures reached of up to 70 bar.

Technical data

Machine

DKA

Press area

700 x 550 mm

Press 1

max. 400°C, 40 tons, 100 N/cm²

Press 2

max. 350°C, 100 tons, 260 N/cm²

Press 3

max. 150°C, 100 tons, 260 N/cm²

Material feed

via transport system

Special features

Automatic, clocked cycle operation

Features

Optional

Individual peripheral equipment for your machines.

Configure your individual machine. We will advise you.

LaminatingPressesScattering

Infrared heating fields

This allows the inlet material lane to be preheated or the powder adhesive to be pre-melted. The infrared heating fields can be equipped with individually ...

LaminatingPressesScattering

Cutting equipment

Cutting devices are used to make the laminated goods as precise as possible. MEYER offers a wide range of longitudinal, center or cross cutting devices ...

LaminatingPressesScattering

Roll-off device

With the "roll to roll" process, the spectrum ranges from mechanically or pneumatically braked roll-off devices to winders with magnetic particle brakes and motorized roll-off ...

LaminatingPressesScattering

Winder

The innovative winders from MEYER are all built in accordance with the EU standard DIN EN 13418:2013 (circumferential force > 150N) and therefore comply with ...

LaminatingPressesScattering

Automation

MEYER relies on industrial robots and pick-and-place systems with suction cups, clamping or needle grippers for moving, depositing and stacking large panels. Even smaller parts ...

LaminatingPressesScattering

Conveyor belts

MEYER offers conveyor belts from 400 mm to 3000 mm width made of plastic, PTFE glass fabric, grid or textile. They can be combined with ...

LaminatingPressesScattering

Stacker

Stacker systems serve to relieve the strain on operating personnel. They systematically place the parts and stack them fully automatically after the laminating process.