Flatbed laminating system KFK-X Meyer Machines

2,300 mm

Cooling zone

144

Aluminum elements

6

Cooling circuits

Machine highlights

meyer-machines-features-einzelgefederte-heizelemente

Individually Spring-Mounted Heating Elements

Individually spring-mounted elements in the heating and cooling system operate at a fixed pressure, ensuring they perfectly conform to the laminating material. This guarantees a homogeneous heat transfer.

meyer-machines-features-pneumatischer-flaechendruck

Pneumatic Surface Pressure

For special applications, machines can optionally be equipped with air cushions. This enables a surface pressure of up to 1.1N/cm², which can be individually controlled in both the heating and cooling zone.

meyer-machines-features-einstellbare-presswalze

Adjustable Pressure Roller

The top belt unit is precisely adjusted via a spindle mechanism to set the gap between the belts to match the laminating material. The pressure and level of the upper pressure roller can be flexibly adjusted to achieve optimal calibration results. Optionally, height and pressure can be adjusted independently on the left and right sides for increased precision between the pressure rollers.

Quick-Change Modules

Save time and cost with specially coated aluminum heating modules, which allow the independent replacement of high-capacity heating cartridges and heating elements.

Quick Belt Change

The modular construction and engineering expertise enable a simplified belt change of the installed system solution without long downtimes.

Zone Heating

The zonal heating system generally consists of three main zones, flanked by three edge zones in both the top and bottom heating units. This results in a total of 18 control zones for optimal temperature regulation. The KFK-XL model even features 24 control zones as standard.

Technical data

Machine

KFK-X

Width (mm)

1.100

1.300

1.500

1.700

1.900

2.100

2.300

2.500

2.700 Pressure max. (N/cm²)

115

101

81

57

42

31

24

19 Height adjustment (mm)

0 to 150

Max. temperature (°C)

240 Heating zone length (mm)

2.300 Cooling zone length (mm)

2.300 Speed (m/min)

0.5 to 25

Control zones (quantity)

18 Features

Siemens SPS Touch

Process data logging

Program management

Quick-Change heating

Spring-mounted elements

Height adjustment

Level adjustment

Heating curve

Zone heating

Endless belts

Belt cleaning device

Spring belt tension system

Interval heating

Optional

Adjustable surface pressure

Contact heating

Contact PLUS heating

Power Cooling

All information summarized for you

Individual peripheral equipment for your machines.

Configure your individual machine. We will advise you.

Pulverstreuer in einer großen Anlage im Einsatz

LaminatingScattering

Powder scattering machine

Thermoplastic adhesive is best treated in powder form. The use of adhesive powder is cheaper than hotmelt, films or webs and also offers the option of reacting quickly to changes in width or grammage.

LaminatingPressesScattering

Infrared heating fields

This allows the inlet material lane to be preheated or the powder adhesive to be pre-melted. The infrared heating fields can be equipped with individually configured heating zones in the run direction or across the run direction.

LaminatingPressesScattering

Cutting equipment

Cutting devices are used to make the laminated goods as precise as possible. MEYER offers a wide range of longitudinal, center or cross cutting devices that can be adapted to your needs.

LaminatingScattering

Material storage

To buffer roll changes or shorter downtimes, accumulators in various designs such as roller conveyors or Z-boxes are used. MEYER offers various types of storage when planning the lines.

LaminatingPressesScattering

Roll-off device

With the "roll to roll" process, the spectrum ranges from mechanically or pneumatically braked roll-off devices to winders with magnetic particle brakes and motorized roll-off devices.

LaminatingPressesScattering

Winder

The innovative winders from MEYER are all built in accordance with the EU standard DIN EN 13418:2013 (circumferential force > 150N) and therefore comply with the latest safety standards. The positioning on rollers or rails makes rewinding even more flexible.

LaminatingPressesScattering

Automation

MEYER relies on industrial robots and pick-and-place systems with suction cups, clamping or needle grippers for moving, depositing and stacking large panels. Even smaller parts can be handled flexibly and easily programmed by cobots.

LaminatingPressesScattering

Conveyor belts

MEYER offers conveyor belts from 400 mm to 3000 mm width made of plastic, PTFE glass fabric, grid or textile. They can be combined with automation technology, sensors, detectors and air systems.

LaminatingPressesScattering

Stacker

Stacker systems serve to relieve the strain on operating personnel. They systematically place the parts and stack them fully automatically after the laminating process.

Get to know the machines from MEYER.

Agree a non-binding meeting to discuss the potential of your production.

Similar machines

Take a look at other machines that could adapt to your application.

Doppelbandpresse KFK-XL - Kaschieranlage mit Doppelband Presse

Laminating plant KFK-X

Laminating

Laminating plant KFK-X

2,300 mm

144

6

Machine highlights

Technical data

Machine

KFK-X

Width (mm)

1.100

1.300

1.500

1.700

1.900

2.100

2.300

2.500

2.700

Pressure max. (N/cm²)

115

101

81

57

42

31

24

19

Height adjustment (mm)

0 to 150

Max. temperature (°C)

240

Heating zone length (mm)

2.300

Cooling zone length (mm)

2.300

Speed (m/min)

0.5 to 25

Control zones (quantity)

18

Features

Optional

All information summarized for you

Individual peripheral equipment for your machines.

Powder scattering machine

Infrared heating fields

Cutting equipment

Material storage

Roll-off device

Winder

Automation

Conveyor belts

Stacker

Get to know the machines from MEYER.

Similar machines

KFK-XL

KFK-X

KFK-EL